Communication is Power

VK-200IPCamg : Wireless 11b/g MPEG4/MJPEG CCD IP Camera

Product Features

Product Image

SoC Embedded ARM-Linux
NTSC@ 30fps, CIF(352*240), QCIF(176*120), Full
D1(720*480)
PAL @ 25fps, CIF(352*288), QCIF(176*144), Full
D1(720*576)
Compression : MPEG-4 for video
NTSC / PAL Auto Detection
Video / Audio data rate can be adjusted
Synchronizes video with audio compression
Multiple clients service is more than 20Mbps streaming  
out and maximum 25 users view
DHCP, PPPoE, Dynamic DNS, TCP/IP, UDP, SMTP, UPnP,
HTTP, RTSP, DNS client
Watch Dog timer function
USB 2.0 interface for external storage (HDD) or flash disk
SD Slot supports card reader function
Supports IE Browsing (ActiveX and Verisign)
Supports dual stream (MPEG4 and MJPEG) at the same time
Supports 3GPP, NTP time Setting
Message in email
Support 2-Way Audio function
Provide Real Time Clock function ¡@
Provides scheduling, recording, event list, management,
playback, transmitting, and recycle
64 Channels Display
Snapshot, Motion Detect Recording, I/O Recording
Auto Recovery when disconnected
Supports Digital Zoom in/out on Preview and Playback
Programmable IP / Subnet / Gateway (IE)
Motion Detection Sensitivity: 1~9 (IE)
Event : 2 alarm in, Motion Detect, Video Loss (IE)
Action : 2 alarm out, E-mail alarm out (IE)
Firmware upgrade from Ethernet (IE)
Video quality setting : Contrast, Brightness, Saturation,
Hue (IE)
Windows XP/2000 required ( DirectX  9.0C or Higher)
Complies with CE, FCC, RoHS, and WEEE
Product Spec
Image Sensor : 1/3¡¨ color CCD Sensor

Video Output : 1 BNC port

Audio Input : Built-In microphone
1 Ethernet port
1 SD card slot
1 USB 2.0 port
802.11 b/g miniPCI card, and supports WEP and WPA
Hardware OSD for time display
Environment : Temperature : 0~50 C degree; Humidity : 10%~90% (non-condensing)
Complies with CE, FCC, RoHS, and WEEE

BACK

¡@